28
28
will be established and you can make a data transfer. If the receiver modem will not
answer/cancel the call, WirelessCom/G10 will display “CSD connection failed”.
4)
If the calls during the test were successful it means your configuration settings were correct
and the device is ready to **work with the configured settings.
5)
Restart the device, upon restart the device will start its initializing procedure and the status
LED will help you follow the various states of the device.
6) If everything is fine the status LED will be either orange (slave mode) or green (master
mode). In slave mode the device is waiting for an incoming call. In case of master mode,
whenever some data arrives on the serial port WirelessCom/G10 will start making connection to
the configured csd_phone number.
* Usually the phone number for voice calls and CSD calls are the same, however there may be
some operators who provide separate phone numbers for voice and CSD connection.
** In order to confirm the working of WirelessCom/G10 with CSD connection it is necessary
that you make a data transfer between WirelessCom/G10 and modem.
