24
24
8.3 Operating parameters
The Teltonika WirelessCOM/G10 internally uses linear power regulator. The PC (or any other
device) where WirelessCOM/G10 is to be connected must have a RS232 interface. Electrical and other
parameters are shown in table 8.2.
Parameter
Minimal
Nominal
Maximal
Units
Power supply voltage
+6.0
+9.0
+15.0
V
Power consumption
45 4000
mW
Table 8.2 WirelessCOM/G10 operating parameters
8.4 Mechanical characteristics
WirelessCOM/G10 housing is made of plastic. It is light and suitable for use in varied
environments. WirelessCOM/G10 has following connectors:
1.
DB9 Female connector for connecting to a PC (or other device).
2.
SIM card holder.
3.
3.5 mm /1.35 mm power supply connector.
4.
SMA connector for external GSM antenna.
Note: modem may malfunction if the environment conditions do not conform to
those provided in the Table!
Note: The device must be powered with AC/DC adapter provided by manufacturer!
9,4 cm
2,2 cm
6,3 cm
1. 2.
3.
4.
