11
11
7.
CONFIGURATION
7.1 Preparing WirelessCOM/G10 configuration
1.
Insert a GPRS enabled SIM card into WirelessCOM/G10.
2.
Connect the physical serial port of WirelessCOM/G10 with COM port of PC (or other device),
using a usual RS232 cable. (If you want to configure do not turn ON WirelessCOM/G10 yet)
* For initial configuration disable PIN query of your SIM card (If active)
7.2 PC setup
1.
Launch Hyper Terminal (it is provided with windows) or any other terminal software on your
PC.
2.
In
New Connection
window put the name of your connection, Etc.: WirelessCOM G10
3.
In the field
Connect using
choose the COM port which you are using to connect
WirelessCOM/G10 and click
OK
.
4.
In
Port Settings
window (see Figure 7.2.1) choose:
ª
Bits per second: 9600.
ª
Parity: None.
ª
Stop bits: 1.
ª
Flow control:
None
.
Figure 7.1: Port Settings window
Now click
OK
button.
Before inserting or replacing SIM card – WirelessCOM/G10 should be switched off!
Otherwise, WirelessCOM/G10 or SIM card may get damaged!
