49
49
Replacing the mixing impeller guide bushing
S02
VERIFICATION FREQUENCY: monthly
AUTHORISED OPERATOR: 1 Operator
TIME NEEDED: 5 minutes
TOOL: -
- Periodically check that the mixing impeller guide bushing is intact and replace it if damaged or worn.
- Only use original spare parts.
Replace the bushing for the mixing impeller drive when there are signs of wear.
Mixing impeller guide bushing
• Remove the bushing to be replaced (A) from the mixing im-
peller (B) drive.
• Insert the new bushing (C) into the mixing impeller (B) drive.
TO AVOID VIBRATIONS AND/OR DAMAG-
ING PARTS, THE MIXING IMPELLER DRIVE
MUST BE COMPLETE WITH ITS BUSHING
BEFORE INSERTING IT ON THE MOTOR
SHAFT SUPPORT.
A
B
C
B
C
C
Chapter 7
Maintenance
TELME S.p.A.
Via S. Pertini, 10 - 26845 Codogno (LO)
Tel.: +39 0377 466.650 - [email protected]
Chapter 8
Troubleshooting
TELME S.p.A.
Via S. Pertini, 10 - 26845 Codogno (LO)
Tel.: +39 0377 466.650 - [email protected]
!!
Summary of Contents for EVOPASTO 120
Page 2: ...2...
