T. E. L. L. SOFTWARE
HUNGÁRIA KFT
33
Event codes:
Figure 32. Event codes
Each internal event can be associated with a Contact ID code. Each one of them has a default Contact ID
code, but it can be modified (see Figure 32.).
CID code
: 3 characters (0
…
9, A, B, C, D, E, F) long event code used for reporting to a monitoring station. (e.g.
130 = burglary; the restore event is reported with the same code)
Partition
:
the event’s partition number
(00
… 99
)
Zone
:
the event’s zone number
(000
… 999
)
Monitoring station settings:
Figure 33. Monitoring station settings
Server groups configured on the Servers tab can be associated with the events. It is also possible to assign
different server groups to the alarm and restore events.
Check the
ENABLE REPORTING
option to start reporting to a monitoring station.
