T. E. L. L. SOFTWARE
HUNGÁRIA KFT
30
Wrong SIM PIN:
This event is generated if the device has a 3G module and PIN code is required to unlock the
SIM card, but the PIN code set on the General tab is wrong. The module tries a PIN code once if there are still
3 attempts. If
there was a failed attempt before a „Wrong SIM PIN” event is generated and you need to remove
the SIM card from the module and unlock it by inserting in mobile phone and entering the correct PIN code.
External event:
You can also set up to 20 external events in the module, which are Contact ID events received
on the simulated phone line. The event codes expected from the alarm center can be added to the event list
and for each code you can set the notification scheme based on which the module needs to report to a
monitoring station, send email, send SMS, etc.
You can add external events with the
„
Add more
”
button at the bottom of the
Events page. The button opens a popup window (see Figure 27.).
Figure 27. External event
When entering the event code, p
artition and zone, it is also possible to define an event group by using the „*”
character. If any hexadecimal digit is received from the alarm center instead of „*”, but the rest of the code is
the same as the one you entered, the given event will be reported. The module compares the event received
from the alarm center with the external events recorded in the table, and if there’s a match,
reports the received
event according to the settings of the event found. The module checks the event by type, then by event code
and finally by partition and zone number. When adding an external event, it is possible to add all the Contact ID
codes, which is the default setting. In this case * must be left in each field and all the CID codes received on
the simulated phone line will be transmitted according to the settings.
