T. E. L. L. SOFTWARE
HUNGÁRIA KFT
27
6.6
Mobile application
Figure 24. Mobile application settings
In the „Mobile application” menu item you can set the server data required for Push message sending and also the
devices that can be assigned with the module.
Enable
:
this service can be enabled/disabled here.
In default the server setting fields are filled with the data of manufacturer's server reserved for this purpose, which are the
followings:
Server IP
: 54.75.242.103
Port
: 2020
Network
:
The drop-down menu allows you to set the communication channel for the device to access the
server and whether it has a backup communication channel. (If the module doesn’t have an extension panel,
only LAN can be selected.)
When adding an application, clicking the update button displays application data.
4 mobile devices can be registered for the module. Each slot has a uniqe identifier that can be displayed by
clicking the QR code button at the end of the line. In the mobile application you can register a device into the
mo
dule by scanning the QR code of the given slot. After the registration the mobile application’s ID and the
mobile device’s name are listed here.
