T. E. L. L. SOFTWARE
HUNGÁRIA KFT
19
Manual:
If you do not have access to the Internet or you can not access the NTP or the TELL
server through the network, you can manually enter the date and time.
The first day of the week:
Setting up the first weekday is needed for the scheduled email sending.
Allow access through HTTPS:
It can be enabled that the module redirect the requests to a secure HTTPS
connection.
Enable UPnP:
The module can be enabled to use UPnP protocol. The UPnP service must be enabled in the
network’s router to work properly.
Default
network
:
You can select default network for the services of the module, e.g. reporting towards
monitoring station, email sending, remote serial data transfer or VOIP calls. If the selected option includes the
mobile network communication, you can enable with the checkbox the image uploading via mobile internet as
well.
If the module doesn’t have
an extension panel LAN will be the default network.
Ping servers:
Ping servers can be set for checking internet and intranet. If the module has an extension panel,
monitoring the mobile internet connection is also possible. Two IP addresses can be set for each network type.
Server selector:
You can select predefined servers from the drop-down list, or you can also specify
„Custom„ servers, in which case IP address 1 and 2 fields become editable.
Ping interval:
sending frequency in seconds
Retry interval for failed ping:
ping attempt frequency if ping failed
Number of failed ping attempts for generating connection lost event:
After the specified number of
failed ping and external event is generated about the failure.
Logoff timeout:
If there’s no activity for
the time set here in minutes, the website will automatically log off.
Ban time:
The user won’t be able to login from an IP address for the time set here, if there was specified
amount of failed login from the same IP address within the specified period of time. If 0 minute is set, the user
won’t be banned for failed login
.
SIM PIN:
If the module has an extension panel you can enter the SIM PIN here. If the SIM PIN is switched off,
the module ignores the content of this field. The module tries a PIN code once if there are still 3 attempts. If
there was a failed attempt before,
a „Wrong SIM
PIN
”
event is generated and you need to remove the SIM card
from the module and unlock it by inserting it into a mobile phone and entering the correct PIN code.
Battery:
If the supply voltage falls below the alarm threshold and remains there for at least 30 seconds a
„Battery fault” internal event is generated. If the supply voltage returns above the alarm threshold and remains
there for at least 30 seconds a „Battery restore” internal event is generated.
APN:
If the module has an extension panel, enter the Internet access point name (belongs to the SIM card, it is
provided by the mobile service provider).
FTP/SFTP:
The module is able to upload the camera images captured during an alarm to an FTP server.
Select the protocol type from the dropdown list (FTP/SFTP)
Enter the IP address of the FTP Server and also the port number if necessary separated by a colon
(e.g.: 192.168.1.1:8181)
The path of the image folder can be also set.
The last 2 fields are for the username and password required for the connection.
TMS server:
The module is able to send not only the Contact ID code to the TMS user monitoring station but
also the captured camera images and the live stream URL of the cameras. To set this
enter the server’s IP
address, the port number and select your network preferences. If there are IP cameras set in the module and
these cameras are associated with an event, the necessary details will be automatically sent towards the TMS
server in case of an alarm.
Update server
: If the Firmware update server is not set, in default the module downloads the firmware update
from the server provided by the manufacturer.
Firmware update
: To get a notification about the updates, enter your email address. You can select from the
dropdown, whether you only want to get the notification about the update, or you also want the update to be
