35
Chapter 6 ADSL Link Performance Statistics
To see the ADSL link performance statistics, you can use the serial console port or the Ethernet interface
to access the command line interface.
After power up wait till
ADSL
LED glows steadily. This condition indicates Router has reached
“
SHOWTIM
E
”. Now <adsl> process commands can be issued at the ‘<adsl>’ prompt to retrieve various
measurements. Refer to chapter 7 for the details of <adsl> process commands.
Chapter 7
Command Sets for Command Line
Interface
Command line interface conventions
z
Command line length may be up to 90 characters long.
z
The command line interface is case-sensitive
z
Parameters in between [ and ] are optional
z
Parameters in between < and > must be entered
z
The command line interface prompts for commands with a prompt that indicates the identity of
the system. It determines how to indicate the identity as follows :
If the SNMP MIB variable sysName.0 exists and is non-empty, that is used first;
Otherwise, if a local IP address exists, that is used;
Otherwise, the local MAC address is used.
For example, the prompt might look like one of the following
DSL>
192.168.7.1>
0:30:eb:ff:0:ff>
