19
Chapter 3 Basic Configurations
This chapter contains configuration information, instructions and examples for the basic link protocols
that supported by the ADSL Router. The information needed to configure the Router is depending on
the chosen link protocol. The link protocol is determined by your NSP(Network Service Provider).
Therefore, It is necessary to know the link protocol which your NSP support before you refer to the
configuration information that will apply to your setup.
3.1 Factory default configuration
The Router is shipped with factory default settings. You may or may not need to change them depend
on what kind of network that your Router is going to be installed.
Configuration item
Default settings of ADSL Router
Ethernet Interface
IP address
192.168.7.1
Network
Mask
255.255.255.0
ADSL interface
IP address
None
Network
Mask
None
ATM VPI/VCI number
0/33
Data Encapsulation Protocol
RFC1483
Machine Name
*DSL
Domain name
Disabled
DHCP Server
Supported by Some Models
DHCP Client
Supported by Some Models
DNS Relay
Supported by Some Models
NAT
Disabled
RIP Disabled
IP filtering
Disabled
Bridge filtering
Disabled
Spanning Tree
Disabled
Telnet login password
*DSL
SNMP access password
*DSL
* ”DSL” for example in here, instead of your machine name and password they are same as your
ADSL Router’s Model.
Model names are: EA701, EA710, EA715
