17
2.4.2 Using terminal program via serial console port
A terminal can be connected directly to the Serial console port. This requires the use of a terminal
emulation software package such as Microsoft HyperTerminal. By default setting, the Router is
configured to communicate at a baud rate of 9600. Any standard terminal that support baud rate of 9600
can be connected to the Router’s console port. Please configure your serial port as:
BPS
:
9600
Data
bits
:
8
Parity
:
None
Stop
Bits
:
1
Flow
Control
:
None
Following steps provide the instructions to log on to the Router via Microsoft HyperTerminal.
1.
Select
Start->Programs->Accessories->HyperTerminal
2.
Enter a connection name and click
OK
3.
Select properly COM port and click
OK
