3.3.1.4.2.- Macromeasurements
A MACROMEASUREMENT is a group of a specific number of memories (different
measurements), that the meter will be able to execute automatically and add the results to a
specific measurement LOG. You can configure
up to 100 different MACRO
MEASUREMENTS!
(automatic measurements with different memories).
The meter can carry out measurements from a list of memories whenever necessary, and then let
the user view the results on the meter, or let the user download these measurements to the PC.
Conceptually, the meter can create the register per LOG and at the same time, in groups of outlets.
A DATA LOG is the list of results (measurements) that are obtained when a
MACROMEASUREMENT is executed automatically, once or various times (different outlets in
the same installation). The meter stores, at the same time
up to 100 different DATA LOGS !
.
The equipment proposes a default name to identify the LOG. This name consists of a name
(LOG) and the macromeasurement that was used.
Each DATA LOG (depending on the number of DATA LOGS that we have) can store the results
of hundreds of different outlets, each one with tens of measurements. For example:
To execute a Macromeasurement quickly
press the short cut button
, then the option
MACROMEASUREMENTS
. The window will display a list of available Macromeasurements. If
no Macromeasurement has been created (
see section 3.3.1.4.2.1.- New Macro
) the window will
be empty. Use the rotating knob to highlight the one we want to execute. The content of each
Macromeasurement is displayed at the bottom of the window.
If there is no macromeasurement saved in the meter, the message "
NO MACROS
" will appear
onscreen.
Figure 20.-
Macromeasurements
3.3.1.4.2.1
3.3.1.4.2.2
3.3.1.4.2.3
3.3.1.4.2.4
No. DATA LOGS
No. of outlets/
DATA LOG
No. of Memories
(measures) / outlet
No. of MEASURES
1
440
70
30800
2
303
50
30300
3
100
100
30000
5
110
54
29700
10
40
70
28000
Multimetter FSM 500
Ref. 5903
32
