Televes FSM 500 User Manual Download Page 39

Page: 39 / 104

If there aren't any DATALOGS stored in the meter's memory, the message "

NO DATALOGS

" will

appear onscreen.

By pressing

a table with two columns will appear. On the left there are the outlets that have

been measured and on the right there are the results of each outlet.

By turning the rotating knob, we can move through the different sockets of the LOG (left-hand

column) and by pressing

we go to the column with the measurements of the socket that is

highlighted (right-hand column). We can move through the different measurements of the

socket in this column using the rotating knob. By pressing

we return to the socket

column.

Figure 31.-

Measurements in each outlet

3.3.1.4.3.1.- Erase LOGS

This option lets you erase the selected LOGS. To do this, use the rotating knob to mark the

LOGS, selecting them using

. The marked registers will appear in yellow, then press the

button (CONFIRM) and complete the erasing process by pressing

. The message

DATALOG ERASED

" will appear onscreen.

Note

When you erase or edit a memory, it is also being erased or edited in the
Macromeasurements where it appears. Erasing or editing a Macromeasurement
does not affect the LOGs that have been generated with the erased or edited
Macromeasurement.

Multimetter FSM 500

Ref. 5903

Summary of Contents for FSM 500









































































































Search results

Summary of Contents for FSM 500

Reviews:

Related manuals for FSM 500

Brands by name

Popular brands

Televes FSM 500, User Manual

Search results

Summary of Contents for FSM 500

Reviews:

Related manuals for FSM 500

Brands by name

Popular brands