manualshive.com logo in svg

Televes FSM 500, User Manual

Share
Download
Televes FSM 500 User Manual Download Page 59

Figure 62.-

Automatic C/N measurement. Channel tuning

Figure 63.-

Automatic C/N measurement. Frequency tuning

If in channel tuning mode, you will be able to see the channel with the carrier that is being used
to carry out the level measurement. As has already been explained in the section regarding the
V/A ratio measurement, if the equipment is in frequency tuning mode, the level measurement
will be carried out in the frequency that the user has tuned, and so it will be the user’s
responsibility to make sure that this frequency corresponds to the real channel carrier.

If the level bar is visible when the C/N measurement is being carried out (see section 

3.3.3.1.1.-

Bar

), two overlapping bars will appear, one in green which indicates the video carrier level

(channel tuning) or the tuned frequency level (frequency tuning), and the other in red which
indicates the measured noise level.

Figura 64.-

Indication of C/N via bars

This function has the following submenu: 

Tuned
frequency 

Channel bandwidth

C/N measurement

Tuned channel

Channel bandwidth

C/N measurement

Selected channel plan

Multimetter FSM 500

Ref. 5903

59

Summary of Contents for FSM 500









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands