Televes FSM 500 User Manual Download Page 7 | Manualshive

Page: 7 / 104

background image

1.2.- POWER SUPPLY

The

FSM 500

has two operation modes; external powering or battery powered.

1.2.1.- Alimentación externa

A DC adapter is provided with the equipment which allows you to connect the equipment to the
mains, both for normal operation as well as for charging the batteries. There is a special
compartment for it in the cover. To connect the equipment to the mains, connect the adapter
to the power connector (13) located on the side of the equipment (see 2.3.-

Element

description

).

When the equipment is connected to the mains, the

Ext. Sup. LED

(11) lights up (see 2.3.-

Element description

).

Figure 1.-

Connection to the mains

1.2.2.- Battery powered

The

FSM 500

comes with one 12V Ni-MH battery. This battery, using an average consumption,

can power the equipment for more than four hours.

The equipment features a complicated control system for charging and discharging the
batteries which optimises their duration and life, and this in turn means that the equipment can
use this form of powering without any abrupt decrease in the length of time.

To charge the batteries, connect the equipment to the mains using the DC adapter (see
previous section). If the batteries have less than 40% of their optimal power, the recharging
process will begin automatically.

However, the battery can be charged even if it has more than 40% of its optimal power by

simply plugging the equipment into the mains and pressing the

button for 3 seconds. To

stop charging, press the same button again for 3 seconds.

Multimetter FSM 500

Ref. 5903

7

«
...
5
6
7
8
9
...
»

Summary of Contents for FSM 500









































































































Reviews:

No comments

Related manuals for FSM 500

Brand: Keithley Pages: 148

Goldmann AT 870

Brand: Haag-Streit Pages: 20

Brand: jenway Pages: 52

Brand: Xtralis Pages: 13

Brand: Tektronix Pages: 124

Brand: Analog Arts Pages: 8

Heavy Duty 2270-20

Brand: Milwaukee Pages: 33

Brand: PCB Piezotronics Pages: 11

Panametrics Aurora H2O

Brand: Baker Hughes Pages: 92

Brand: phase II Pages: 11

Brand: Z-Wave Pages: 5

Brand: Klein Tools Pages: 20

IMI Sensors 66212ANZ2

Brand: PCB Piezotronics Pages: 6

D48-F, D4B-2F, D4B-3F, D4B-7F, D48-SF

Brand: Westinghouse Pages: 8

BlueForce Smart

Brand: CAME Pages: 24

Brand: GW Instek Pages: 91

Brand: AEMC Pages: 16

Brand: Solight Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands