MOSAIQ6 Multi-touch Meter/Analyser
28
6.2.2.- Options context menu:
• Quality profile: allows to select the quality profile
• Powering:
-
VDC: Selects the preamplifier powering.
-
DiSEqC (only satellite band): selects the
DiSEqC parameter (Sat A, Sat B, Sat C, Sat
D).
-
Positioner (only satellite band): makes it
possible to control the DiSEqC motors
used to move mobile parabolic antennas.
This function is available in satellite mode
and when the equipment is powering the
LNB.
Halt: This command stops the motor
movement.
East: Allows to move the motor in the
EAST direction. Each click corresponds to
one step in the movement of the motor
(pitch motors). By holding the key down,
successive movement sequences will be
executed until the key is released.
West: Motor movement in the WEST
direction. Each click corresponds to
one step in the movement of the motor
(pitch motors). By holding the key down,
successive movement sequences will be
executed until the key is released.
Store: 8 storage positions are available
to store at up to 8 antenna positions . This
command allows one of 8 positions to be
chosen where the current position of the
antenna will be stored.
Goto: recovers one of the 8 positions
for the antenna that has been previously
stored.
-
SCR (only satellite band): Selects the SCR
parameters (multiswitch, standard and slots)
When a slot is enabled (for example slot 3,
freq. 1210MHz), the meter will tune into the
slot frequency (1210MHz) and will set the
slot with the meter parameters: frequency,
band (powering), and DiSEqC. In addition, a
SCR icon will be shown in the bar at the top
(SCR3) to indicate that the slot is enabled.
While the slot is enabled, all the setting
changes of the meter, will be applied to the
currently slot (SCR3).
6.3.- Mosaiq 6
This screen has 6 widgets. Theses widgets ares user-
configurable, that is, the user can select the function
he or she wants to visualize in each widget.
6.3.1.- Main window
All the available features are explained in section
6.4.-
Features
.
Swipe on the spectrum to
chage the channel
Tap on the title bar of the
widget to change the
function
Double tap to see the
function in full screen
