manualshive.com logo in svg

Televes 596101, User Manual

Share
Download
Televes 596101 User Manual Download Page 12

MOSAIQ6 Multi-touch Meter/Analyser

12

Gestures

MOSAIQ6 has an innovative interface, exclusively 

designed to get the most out of its 8” multi-touch 

display. 

To do this, MOSAIQ6 uses some gestural commands  

that are explained below:

 

Tap

: one fast touch with one finger.

    

Double tap

: two fast consecutive 

touches with one finger.

  

Swipe

: short swipe with one finger.

  

Drag

: drag with one finger.

     

Pinch/Spread

: pinch/spread two 

fingers on the screen.

 

 

Drag and drop

.

Before starting

The first time you turn you MOSAIQ6 on, please 

follow the next steps for a proper registration. To 

do that, you must be registered on the Televes 

website (www.televes.com).

In addition, you need internet connection 

(Ethernet or Wi-Fi). Then, please follow the next 

steps that will be shown on the screen :

1.- Choose the language

2.- Select the internet connection (Ethernet or Wi-

Fi):

Tap to 

continue

Scroll the bar to see all 

the languages

Tap to choose the 

language

Summary of Contents for 596101


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands