EN
45
44
installation relative to a reference point, usually the
head-end output. So, the first thing you must do is
connect the meter to the reference point and tap
on the Calibrate button. In this way, the equipment
will measure and save the level of all the channels.
Then you must go to all the pints of the installation
where we want to measure and connect the meter,
taking care to have this function ON. The MOSAIQ6
will measure the levels of all the channels
comparing them with the reference ones.
When this option is ON, the bars of the graphic
don’t represent the level or the power of the
channels, but the attenuation of each one of them.
The list shows power (or level) and C/N. In addition,
a green trace is shown in the spectrum. This trace
indicates the levels in the reference point.
• Quality profile: allows to select the quality profile .
• Powering:
-
VDC: Selects the preamplifier powering.
8.2.- Mosaiq 3+1
This screen has 4 widgets, 3 in the top of the screen
and one in the lower part of the screen. Theses
widgets ares user-configurable, that is, the user
can select the function he or she wants to visualize
in each widget.
8.2.1.- Main Window
The available features are explained in section
8.3.-
Radio features.
8.2.2.- Options context menu
• Quality profile: allows to select the quality profile .
• Powering:
-
VDC: Selects the preamplifier powering.
Short swap on the spectrum
to change to previous/next
channel
Tap on the title bar of the
widget to change the
function
Double tap to see the
feature in full screen
