MOSAIQ6 Multi-touch Meter/Analyser
36
slot is enabled. While the slot is enabled,
all the setting changes of the meter, will
be applied to the currently slot (SCR3).
• Relative Marks: ON/OFF
If ON is selected, the marks will be relative
to their position in the grid, not to their
frequency
6.4.6.- Constellation (RF Input)
This feature shows the constellation diagram of the
tuned channel.
6.4.6.1.- Main window
Constellation diagram
Spread/Pinch to zoom in/out
List of measurements of the channel
Tap on i to see the parameters of the signal
6.4.6.2.- Options context menu
• Grid: ON/OFF. Shows/hide the grid.
• Carrier (only DVB-T/T2): All, TPS+continual (only
DVB-T), Other. Allows you to select the constelation
of the selected carrier(s).
• Quality profile: allows to select the quality profile
• Powering:
-
VDC: Selects the preamplifier powering.
-
DiSEqC (only satellite band): selects the
DiSEqC parameter (Sat A, Sat B, Sat C, Sat D).
-
Positioner (only satellite band): makes it
possible to control the DiSEqC motors used
to move mobile parabolic antennas. This
function is available in satellite mode and
when the equipment is powering the LNB.
Halt: This command stops the motor
movement.
East: Allows to move the motor in the
EAST direction. Each click corresponds to
one step in the movement of the motor
(pitch motors). By holding the key down,
successive movement sequences will be
executed until the key is released.
West: Motor movement in the WEST
direction. Each click corresponds to
one step in the movement of the motor
(pitch motors). By holding the key down,
successive movement sequences will be
executed until the key is released.
Store: 8 storage positions are available
to store at up to 8 antenna positions . This
command allows one of 8 positions to be
chosen where the current position of the
antenna will be stored.
Goto: recovers one of the 8 positions for
