TP2000 Transmitter
-
Installation and Operation Manual
13
2.2.3
Inputs Tab
Next to the
radio
tab you will find the
inputs
tab, see Figure 9, that controls the values
on the transmitter’s inputs.
Figure 9. The inputs Tab.
Defining the parameters on the Transmitter inputs.
In the
inputs
field define the parameters on the transmitter inputs - from
in1
to
in8
, the
arm
(Open/Close) and
aC
(power on) inputs.
The events for which you can require activation, i.e. a signal to be send out, are:
•
aL -
the transmitter will send out a signal for an alarm event as soon as a signal is
received on the corresponding input.
•
re -
the transmitter will send out a restore signal on receiving a signal on the
corresponding input.
•
Tr -
the transmitter will send out a signal if a fault is registered at the corresponding
input.
•
inV -
the transmitter will invert alarm and restore signals.
Summary of Contents for TP2000
Page 23: ...PALM PROGRAMMATOR OPERATION MANUAL ...
Page 35: ... NOTES ...
