20
TP2000 Transmitter
-
Installation and Operation Manual
Figure 16. The Test mode Tab.
At first all indicators will
glow in dark green
. This means that the inputs are inactive, i.e.
no signal has been sent out.
The colour indication of the last four indicators is to be understood as follows:
•
Test
lights up in light green on sending a test message.
•
Battery
glows in red when the battery is flat and in green when the charge has been
restored.
•
aC
glows in light green when power has been fed from the mains and in red when
power failure has been established.
•
Power
lights up in light green when power up the transmitter.
Note:
If within 30 seconds no input signal has been received the program
Programming
Kit for TP2001 v.6.5 Transmitters
will automatically quit test mode.
Summary of Contents for TP2000
Page 23: ...PALM PROGRAMMATOR OPERATION MANUAL ...
Page 35: ... NOTES ...
