16
TP2000 Transmitter
-
Installation and Operation Manual
With choosing the
Logical reloc.
you can direct the events to one of the two frequencies
as desired.
The type of the events that you can direct to a relevant frequency are as follows:
•
alarm
(alarm event in the system)
•
restore
(Restore the security monitoring of the system)
•
Trouble
(Technical trouble in the system)
•
Batt. Low
(Low charge level of the battery)
•
Batt. High
(Restore of the normal charge level of the battery)
•
Disarm
(Disarming the system)
•
arm
(Arming the system)
•
aC Loss
(Main power supply loss)
•
aC restore
(Main power supply recovery)
•
Power On
(Power supply on)
•
Test
(The system is in test mode)
Check one or both boxes next to each event depending on whether you want the signal
for this event to be transmitted on Frequency 1, Frequency 2 or on both frequencies at
the same time.
With choosing the
Physical reloc.
you have the possibility to direct the input events
independently to both frequencies, see Figure 12.
Figure 12. advanced Properties screen.
Inputs to Frequencies active field.
Summary of Contents for TP2000
Page 23: ...PALM PROGRAMMATOR OPERATION MANUAL ...
Page 35: ... NOTES ...
