Server Installation and Maintenance
Installing the Server
23
Lightspeed G-Series Guide
Installation in Round Hole Rack
If your rack has round threaded holes, first remove the aluminum block at the end of
the rail via the 2 screws, as shown here:
Push the rail into the rack until the quick release bracket snaps into place, securing the
rail to the rack.
Extend the rear of the rail to align it with the holes on the rear of the rack (D). Push the
rail into the rack until the quick release bracket snaps into place, securing the rail to the
rack.
Installation in Square Hole Rack
Align the square pegs on the front of the rail with the square holes in the front of the
rack (C).
Push the rail into the rack until the quick release bracket snaps into place, securing the
rail to the rack.
Extend the rear of the rail to align its square pegs with the square holes on the rear of
the rack (D). Push the rail into the rack until the quick release bracket snaps into place,
securing the rail to the rack.
Caution: To prevent the server chassis from falling and becoming damaged, be
sure the rails are solidly in position and ready to support the full weight of the
chassis.
