Server Installation and Maintenance
Maintaining the Server
40
Lightspeed G-Series Guide
WARNING:
Only trained and qualified personnel should be allowed to install, replace, or
service this equipment.
WARNING: This unit has two power supply connections. Both connections must be
removed to completely de-energize the unit.
Replacing the Power Supply
1.
Unplug the AC power cord from the failed power supply module.
2.
Push in the locking tab at the back of the module to release it.
3.
Pull the unit straight out of the chassis.
CAUTION:
the power supply may be very hot when first unplugged and could cause
burns. Handle carefully by the edges and do not touch hot components.
4.
Insert the new unit into the chassis, pushing it in until it clicks firmly in place.
5.
Reconnect the power cord.
