Server Installation and Maintenance
Installing the Server
20
Lightspeed G-Series Guide
Installing the Server
The following topics cover physical server installation:
■
■
WARNING:
Only trained and qualified personnel should be allowed to install, replace, or
service this equipment.
CAUTION:
Except for replaceable power supplies and hard drives which may be
accessed from the outside, the Lightspeed Server is a sealed device, with no user-
serviceable parts or user-accessible expansion slots. You should never open the top
cover or attempt to upgrade or alter the server. Doing so exposes you to electrical
hazard, may damage the unit, and may invalidate your warranty.
If you have hardware or software problems with your Lightspeed Server, follow the
Obtaining Support | Information | Assistance
Note:
Before proceeding, work with your network administrator to determine
computer and network setting requirements.
Unpacking the Server
The Lightspeed Server is packed for shipping in a heavy-duty, cardboard box with foam
padding surrounding the device to protect it. During unpacking, inspect the container
and the contents for damage. If there is any damage, report it immediately to the
freight carrier and to Telestream Support (see
Obtaining Support | Information |
for contact information).
CAUTION:
The server is heavy. Unpack the server on a strong, well-balanced table
that supports the full weight of the server and shipping container without tipping.
Inside the box are the server, optional components such as rack rails and
documentation on paper and flash drive (a DVD is available by request).
