TELES TELES.iPBX 8TR Box, User Manual

Page: 4 / 83

R Function Digits Description P F
X Dial tone 400 Hz
default
∗Π
032port
#
∗Π
033port
#
Necessary for some fax machines or modems: constant 400 Hz dial tone. 42 default
X
Direct call on
off
∗Π
199port dest
#
∗Π
199port
#
port
contains the port’s number [11..18].
dest
contains the destination call number that should be dialed im-
mediately when the receiver is lifted.
34 off
Disconnect
∗∗
Disconnects the current connection when another connection is on hold. 13 -
X Distribution on
∗
45port distr
#
incoming calls off
∗
45
#
port
contains the number of the port for which incoming calls should be distributed.
distr
contains up to
eight call forwarding destinations. The last number can be an external number.
27 off
X
Drop port on
off
∗
47port time
#
∗
470
#
Serves to accept calls that cannot be assigned to a specific port. Time setting is valid only for point-to-point lines
to accept incompletely dialed calls. If port 0 is set then the drop port is deactivated.
47 1
ISDN line P-to-MP
configuration P-to-P
∗Π
081
#
∗Π
080
#
081 sets the box for point-to-multipoint line.
080 sets the box for point-to-point line.
36 PMP
X Music
On-hold tone
∗Π
071
#
∗Π
070
#
Select between music from attached audio source or standard on-hold tone to be played for calls on hold 46 On-
hold
X
Night service ∗Π
9type
# Preset night service
type
for distributing incoming calls. 28 0
PBX commands
0
# When the TELES.iPBX 8TR Box is attached to a PBX: In order to send commands to the attached system dial
outside line access and then #. All further commands are valid for the system, e.g. *#.
50 -
Pickup - global ∗
5
# Pickup an incoming call from any port. 18 -
Pickup - port ∗
5port
# Pickup an incoming call from a certain port. 18 -
X PIN ∗Π
old00
Π
new
∗Π
new
#
Π
old
is the old PIN and
Π
new
the new PIN. The new PIN is entered twice.
35 empty
X Ring tone on
differentiation off
∗Π
035port
#
∗Π
034port
#
Different ring tones for incoming internal and external calls. Some answering machines, fax machines or mo-
dems recognize only the internal ring tone. In this case, leave the option switched off.
42 off
X
Routing through different
network carriers
∗Π
830
∗
0
∗
type
∗
NoB
∗
NoC
#
To establish a connection through alternative network carrier set routing method and number area to be routed:
For
type
select 1=Direct Line Access or 2=automatic dialing of the network carrier.
NoB
= outside line access
and call number area of the connections to be routed.
NoC
= outside line access and either access number of the
dial-in node or carrier access,
∗
,identification code respectively.
53 off
X Routing exception
∗Π
831
∗
0
∗
No
#
Call number that should not be dialed through alternative network carriers. Lift exception:
∗Π
832
∗0∗
No
#
56 -
X Routing delete
∗Π
833
∗
0
#
Establishing a connection through an alternative network carrier is deactivated. 56 -
X
Routing on ∗Π
834
∗
0
∗
1
#
alternative off
∗Π
834
∗
0
∗
0
#
Establishing an alternative routing through the public telephone network when the alternative network carrier is
congested (i.e. busy).
57 on
X Service indicator ∗Π
051port service
#
port
contains the port’s number [11..18],
service
the service ID for outgoing calls
(1= analog telephony; 2 = ISDN telephony; 3 = fax G2 and G3; 4 = answering machine).
38 1
X Speed dial ∗
3speed dest
#
speed
contains the speed dial number [800..899] and
dest
the complete telephone number of the destination. 37 empty
Three-party conference ∗# The held connection is joined as third party to the current connection. 16 -
Time ∗
79hhmm
# The value
hhmm
contains the time to which the internal clock of the TELES.iPBX 8TR Box is set. 44 -
Wake-up call set
delete
∗
71hhmm
#
∗
70
#
The value
hhmm
contains the hour [00..23] and minute [00..59] when a wake-up call should be sent to the cur-
rent port.
43 off
Column headers: R - can be controlled by remote administration; P - see specified page; F - Factory settings
Π
PIN is optional (see section 5.1, page 35)