Further Settings
Page 50
2004 by TELES AG Berlin, Version 2.0/iPBX8TRe/6.02, Issue: May 1998
5.16
Commands for the PBX or Exchange Switchboard
You to need to observe the following instructions only if
•
your TELES.iPBX 8TR Box is attached (subordinate) to a PBX or if
•
you would like to switch functions through your local exchange switchboard.
When your TELES.iPBX 8TR Box is attached to another
PBX
all functions are
of course still valid that are described here in this manual. However, in case you
would like to access PBX functions directly, all entries have to be forwarded
from the TELES.iPBX 8TR Box into the PBX’s net.
The same is valid for functions such as call forwarding that you can control
through your
exchange switchboard
. Find out which other supplementary ser-
vices your telephone company offers and how they can be activated in the
switchboard.
In any case, dial the outside line access of the TELES.iPBX 8TR Box first and
then press the pound key. The commands that are entered then, go straight to
your PBX or to the local exchange; nothing is valid for the TELES.iPBX 8TR
Box.
Υ
Lift the receiver. You hear the dial tone.
0
Enter the outside line access 0.
#
Press the pound key.
Ν
Enter digits for functions or commands that the PBX or switch-
board understand.
