Further Settings
Page 42
2004 by TELES AG Berlin, Version 2.0/iPBX8TRe/6.02, Issue: May 1998
5.8 Different Ring Tones
You can configure different ring tones to easily recognize incoming
internal or
external
calls or
callback on busy
calls (see inside cover for tone sequences).
The different ring tone function is not activated by default because some an-
swering machines, fax machines, etc. recognize only the ring signal for internal
calls.
Activate different ring tones:
Υ
Lift the receiver. You hear the dial tone.
∗
Press the star key.
Π
Enter the PIN if necessary.
035
Enter the digits 035.
Ν
Select the port for which you would like to set different ring
tones.
#
Press the pound key. Listen for the confirmation tone. Internal
and external calls now have different ring tones.
∆
Put the receiver down.
Deactivate different ring tones:
Υ
Lift the receiver. You hear the dial tone.
∗
Press the star key.
Π
Enter the PIN if necessary.
034
Enter the digits 034.
Ν
Select the port for which you would like to remove different of
ring tones.
#
Press the pound key. Listen for the confirmation tone. The inter-
nal ring tone is valid now for internal as well as external calls.
∆
Put the receiver down.
Example:
You switch off the special ring tone for external calls for port
12.
∗
(
Π
) 034
12
#