Further Settings
2004 by TELES AG Berlin, Version 2.0/iPBX8TRe/6.02, Issue: May 1998
Page 35
5 Further Settings
5.1 PIN
The PIN or code number is
optional
. No PIN is preset at delivery. However, it is
recommended to set a PIN in order to protect the TELES.iPBX 8TR Box from
unauthorized usage.
Once it is set, the PIN
is required
for many functions and settings (see command
overview inside the cover).
Note:
Remember the newly programmed PIN well. When the PIN is
lost or forgotten, send the device back to the manufacturer. The
old PIN and all settings are deleted. This repair will cost you a
fee. Read the service notices in section 9.5, page 70.
Set PIN:
Υ
Lift the receiver. You hear the dial tone.
∗
Press the star key.
Π
In case it already exists, enter the
old
PIN.
00
Enter the digits 00.
Ν
Enter the
new
PIN. Up to 5 digits is possible.
∗
Press the star key.
Ν
Repeat the entry of your
new
PIN.
#
Press the pound key.
∆
Listen for the confirmation tone. Put the receiver down.
Example:
Change the PIN from 5678 to 1234:
∗
5678
00
1234
∗
1234
#
Delete:
Delete the PIN using the same combination, but without enter-
ing a new PIN.
Delete:
∗
Π
00
#
