Further Settings
2004 by TELES AG Berlin, Version 2.0/iPBX8TRe/6.02, Issue: May 1998
Page 45
5.11 Activate Call List
The TELES.iPBX 8TR Box is capable of recording statistics on all outgoing
connections. The detailed call record contains date and time of when the connec-
tions were established, connection charges, destination call number, type of call
and port from which the call was made.
This service can only be used when your ISDN line features advice of charges
during (AOC-D) or at the end of calls (AOC-E). Due to technical reasons, devia-
tions can occur for comfortable call transfer between displayed and actually in-
voiced charges. See also the notes on the limitations of advice of charges in sec-
tion 4.7.5 Charge Account on page 33.
You’ll need the PC-ISDN communications suite
TELES.OnlinePowerPack
(as
of version 6.0i) to view this call list. The ISDN device manager program in-
cluded displays all statistics. Prerequisite is that you have a
point-to-multipoint
line
and that you’ve installed a
TELES.ISDN adapter
along with the box (see
Activate call list:
Υ
Lift the receiver. You hear the dial tone.
∗
Press the star key.
Π
Enter the PIN if necessary.
8401
Enter the digits 8401.
#
Press the pound key. Listen for the confirmation tone.
Deactivate Call list:
Υ
Lift the receiver. You hear the dial tone.
∗
Press the star key.
Π
Enter the PIN if necessary.
8400
Enter the digits 8400.
#
Press the pound key. Listen for the confirmation tone.
Note:
The memory in the TELES.iPBX 8TR Box is limited. That is
why only up to 60 connections can be recorded. All following
data is ignored. The yellow charge LED blinks when the mem-
ory is almost full. After you’ve read out the data, you can delete
the memory.
