Further Settings
Page 46
2004 by TELES AG Berlin, Version 2.0/iPBX8TRe/6.02, Issue: May 1998
5.12 On-hold Music and Audio Source
5.12.1 Attach Audio Source
You can attach an external audio source to the TELES.iPBX 8TR Box so that
on-hold music can be played for a held connection (e.g. during hold and alter-
nate and during transfer).
Plug in e.g. a CD player, a recorder or a radio to the socket (3.5 mm jack) on the
rear side of the box.
5.12.2 On-hold Tone or Music
By default the box’s on-hold tone is active (see inside cover). When an audio
source is attached, you can substitute the on-hold tone by on-hold music. Use
the 071 and 070 commands to select the option.
Note:
Should a further connection be held on the other port at the
same time, then the box transmits the
on-hold tone
to the
second
held party instead of on-hold music.
Activate on-hold music:
Υ
Lift the receiver. You hear the dial tone.
∗
Press the star key.
Π
Enter the PIN if necessary.
071
Enter the digits 071. From now on, the first external caller that is
put on hold hears your on-hold music.
#
Press the pound key. Listen for the confirmation tone.
Activate on-hold tone:
Υ
Lift the receiver. You hear the dial tone.
∗
Press the star key.
Π
Enter the PIN if necessary.
070
Enter the digits 070. The audio source’s on-hold music is deacti-
vated. The box’s on-hold tone is valid again.
#
Press the pound key. Listen for the confirmation tone.