Teledyne T640, User Manual

Page: 40 / 88

08354B DCN7877 Teledyne API T640 PM Mass Monitor
38
MENU DESCRIPTION LOCATION
Setup
Configure a variety of features and functions through these
submenus for customized operation. Section 3.2
Datalogging
Track and record concentration and calibration data and
selectable diagnostic parameters, the reports for which
can be viewed in the Utilities>Datalog View menu and
downloaded to a flash drive via the Utilities>USB
Utilities menu (Section Figure 3-15).
Also, select configured Events (Section 3.2.8) and
create customized triggers for data logging functions. Section 3.2.7
Events
Select parameters and define the conditions by which
they are to be flagged and recorded in the Alerts log
(Section 3.2.5) when they are triggered. Once
configured, Events can be used to trigger Datalogs
(Section).
Section 3.2.8
Dashboard
Monitor instrument functionality (Figure 3-2) via
selectable parameters.
Section 3.2.9
Vars
Manually adjust several software variables that define
specific operational parameters.
Section 3.2.10
Homescreen
Configure the parameters to be displayed in the three
meters (Figure 2-25).
Section 3.2.11
Instrument
View product and system information, including list of
included options, if any; view network settings;
view/adjust Date and Time settings
* ; and check for
firmware updates when connected to a network that is
connected to the Internet.
* Time Zone change requires special procedures (Section
3.2.12.2).
Section 3.2.12
Comm View and configure network and serial communications. Section 3.2.13
CONFIGURATION AND SETUP
Configure pages, set up reporting parameters, and customize any of several features
to suit user needs.
HOMESCREEN
Three meters at the bottom of Home page display user-selectable parameters and
their values. To select, go to the Home Configuration page by touching the
configuration button
(shortcut) and following the onscreen instructions (see
Figure 3-1). The Home page can also be configured through the Setup menu
(Section 3.2.11).