08354B DCN7877
Teledyne API T640 PM Mass Monitor
56
INSTRUMENT DATE/TIME ADJUSTMENTS
The Date/Time Settings menu allows changes to time zone, hour, minutes after the
hour, and date, including auto-adjust for Daylight Savings Time.
If the Time Zone requires change, it must be set first, and the instrument must be
restarted before making any other changes, including date or time, to ensure
changes are not lost.
IMPORTANT
IMPACT ON TIME ZONE
If the instrument is restarted without allowing adequate time for a
Time Zone change to be accepted, the change will be lost. Verify
the change by returning to Home page, then navigating back to the
Date/Time Settings; if the selected Time Zone is highlighted, then
the change is set for taking effect after the instrument is restarted.
Changes to date and/or time do not require a reboot.
Figure 3-23. Date and Time Configuration Page
Summary of Contents for T640
Page 2: ......
