MX 16
ANALOG AND DIGITAL CONTROLLER
USER GUIDE
20
NP16EN
Revision: A.0
of the building, in the immediate proximity of the MX 16, and be easily accessible to operators.
It shall be marked as the cut-off device of the MX 16.
The main power shall be connected to the terminal block as indicated in Figure 10. The ground
conductor shall be connected to the ground terminal
. Connect earth before connecting L/N
conductors. Disconnect earth after disconnecting L/N conductors.
Figure 10: Connection of the main power supply
Grounding
The
MX 16 meets EMC and Low Voltage Directives requirements. In order to fully comply with
the class of protection, it is absolutely necessary to connect the ground terminal to the Earth of the
site (Figure 11, A). Moreover, the cable braids of the digital and analog lines shall also be
connected to this ground terminal.
Figure 11: Ground and braid connection
Summary of Contents for Oldham MX 16
