MX 16
ANALOG AND DIGITAL CONTROLLER
USER GUIDE
NP16EN
Revision: A.0
9
3
Mechanical Installation
MX 16 Controller
Location
The
MX 16 is intended for indoor use only and shall be installed in premises without explosive
atmospheres, away from direct exposure to sunlight, and protected from humidity, dust, and
temperature variations. It shall preferably be located in a monitored environment (for instance:
guardhouse, control room, or instrument room, etc.).
Attachment of the wall enclosure
Access to the controller must be ensured in order to facilitate adjustments, monitoring, and
cabling. A space of 400 mm is necessary in front of the
MX 16 for opening the door. Use 3 fixing
screws 4x25 mm for fixing the case support.
Figure 4: Dimensions
Figure 5: Fixing the
MX 16
Gas detectors
Refer to the manual supplied with each detector.
Summary of Contents for Oldham MX 16
