
6 RU SSPA Chassis Operations Manual
202058 REV AA
151
9.6.3.2 Extended SNMP MIB Tree Elements in Detail
deviceRevision
— Octet string type; maximum length 60; field specifies device
firmware revision; read only access; OID -1.3.6.1.4.1.20712.1.3
deviceUpTime
— Device total up time in hundredths of a second;
deviceFaultTime
— Time elapsed since deviceLastFault last state change in
hundredths of second;
deviceSFaultCounter —
Counts number of Summary alarms since device power up;
deviceSummaryFault —
Enumerated value of device last detected fault condition.
The
following enumerated values are possible: coldStart(1), overTemp(2), badRegltr
(3), lowDCCur(4), aux(5), buc(6), lna(7), hpa(8), lowFwdRF(9), highRefRF(10),
nPlusOne (11), badPS(12), timeOut(13), other(14), noFaults(15);
deviceTrappedConditionValue
— Condition value trapped by deviceConditionTrap;
deviceManagerIP —
Trap recipient IP address;
deviceFaultsTrapResend
— Defines how many times deviceFaultsTrap will repeat
the message. 0 - Disables trap triggering;
deviceConditionTrapResend
— Defines how many times condition trap will repeat
the message. 0 - Disables trap triggering
deviceConditionToMonitor
— Enumerated value. Object defines which condition to
trap. The following enumerations are possible: fwdRF(1), dcCurrent(2),
voltagePS(3), temperature( 4), lnaCur(5), refRF(6);
deviceConditionULimit
— Conditions upper trap limit. Trap will be sent when the
condition exceeds this limit.
deviceConditionLLimit
— Conditions lower trap limit. Trap will be sent when
condition falls below this limit.
deviceConditionLocation
— Parameter specifying condition measuring location in
device containing multiple location of the same type (multiple PS, RF modules,
LNAs etc.). Set to 0 for system-wide conditions, 1, ... n for relevant unit. For
devices with single condition location parameter is “don’t care”.
deviceFaultsTrap
— Trap fires deviceFaultsTrapResend times when deviceLastFault
or deviceSummaryFault state changes.
Summary of Contents for 6 RU Chassis
Page 110: ...110 202058 REV AA 6 RU SSPA Chassis Operations Manual THIS PAGE LEFT INTENTIONALLY BLANK...
Page 156: ...156 202058 REV AA 6 RU SSPA Chassis Operations Manual THIS PAGE LEFT INTENTIONALLY BLANK...
Page 172: ...172 202058 REV AA 6 RU SSPA Chassis Operations Manual THIS PAGE LEFT INTENTIONALLY BLANK...