Teledyne 6 RU Chassis, Operation Manual

Page: 135 / 172

6 RU SSPA Chassis Operations Manual 202058 REV AA 135
Click on the [Log In] button to open the M&C control in the browser. See
Figure 9-11
.
The top bar of SSPA Monitor and Control application shows device’s online status,
transmit status, RF output power, reflected RF power (if available), attenuation and RF
module core temperature.
Left side of the window displays unit model and serial number, firmware build, device
MAC address and device up time since last I/O card power up or reboot.
Additional information is displayed in multipage insert in the middle of the screen:
•
Status tab
: A view of critical device operation parameters and alarm sta-
tuses.
•
Communication Setup tab
: Read/write listings of communication related
parameters, including: IP, SNMP, Web settings as well as serial port set-
tings.
•
General Settings tab
: Read/Write listings of all redundancy and amplifier
specific settings.
•
Fault Settings tab
: Read/Write listing of fault operation related settings;
•
N+1 tab
: page shows N+1 system related operation parameters.
The web server has limited hardware resources to support multiple simultaneously
connected users. In the case that multiple users are connected to the same amplifier,
service quality cannot be assured.
Figure 9-11: RM SSPA Web Interface, Status Tab