Teledyne 501 TRS, Operation Manual, Page: 35 / 111

33
5.
OPTIONAL HARDWARE AND SOFTWARE
This section includes descriptions of the hardware and software options available for the
Model T102 analyzer and M501-TRS converter that are different from or not included in
the
Options section of the T101 Manual - PN 07266. For all other available options see
that manual.
For assistance with ordering these options please contact the sales department of TAPI
at:
TOLL-FREE: 800-324-5190
TEL: +1 858-657-9800
FAX: +1 858-657-9816
E-MAIL: apisales@teledyne.com
WEB SITE: http://www.teledyne-api.com
5.1.
Rack Mount Kits (Options 20a, 20b, 21, 22 & 81)
The following table supersedes the table included in Rack Mount Kits (Option 20a, 20b
& 21) section in the T101 Manual - PN 07266.
OPTION NUMBER DESCRIPTION
OPT 20A Rack mount brackets with 26 in. chassis slides.
OPT 20B Rack mount brackets with 24 in. chassis slides.
OPT 21 Rack mount brackets only
OPT 22 Rack Mount for M501-TRS
OPT 81 Rack Mount for M501-TRS with slides
5.2.
Calibration Valves Options
5.2.1.
Zero/Span Valves (Option 50) & Internal Zero/Span Gas Generator
(Option 51)
The description of the construction and operation for the zero span and IZS valve
options for the T102 TRS is identical to that information contained in
Calibration Valves
Option section in the T101 Manual - PN 07266.
However, the internal pneumatic flow or the T102 with either of these options installed
is different. See:
• Figure 5-1 for an illustration of the T102 internal gas flow with the
zero/span valves option
•
Figure 5-2 for an illustration of the T102 internal gas flow with the IZS
valve option
07267B DCN6485