Teledyne 501 TRS, Operation Manual, Page: 34 / 111

Pneumatic Connections
Teledyne API - T102/501 TRS, Addendum to T101 Operation Manual
32
4.3.
Initial Calibration
Initial calibration of the T102 should be performed with:
•
Zero air supplied by a zero air generator such as the TAPI Model 701;
•
Calibrated H
2
S span gas of the appropriate concentration:
• With external pneumatic connections as described in Figure 4-1 through
Figure 4-5 of this addendum, and;
•
Using the information and procedure included in the Initial Calibration
section in the T101 Manual - PN 07266.
No initial calibration of the M501-TRS instrument is required.
NOTE
Once you have completed the above set-up procedures, please fill out the quality
questionnaire that was shipped with your unit and return it to TAPI. This information
is vital to our efforts in continuously improving our service and our products. Thank
you.
07267B DCN6485