Sentinel V SC and RT Operation Manual
September
2017
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
Page 229
Description SM sets the trigger Mode. SM0 turns off the trigger mode and disables all other commands
on this menu. SM2 sets the RDS3 Slave mode and enables the SA and ST commands.
ST – Trigger Timeout
Purpose
Sets the amount of time the ADCP will wait to hear a synch pulse before proceeding on its
own.
Format
STnnnnn
Range
nnnnn = 0 to 10800 seconds (0 = no timeout)
Default
ST60
Recommended Setting. Special applications only.
Description ST sets the amount of time the ADCP will wait to hear a synch pulse before proceeding on
its own. If the ADCP times out, it will automatically ping according to the CF, TP, TE, WP,
and BP command settings. This is a fail-safe mechanism designed to allow the ADCP to
proceed on its own should communications with the synch pulse fail. Setting ST = 0 tells
the ADCP to wait indefinitely.
This command has no effect unless SM = 2