Teledyne RD Instruments SENTINEL V REAL-TIME Operation Manual Download Page 14

Page: 14 / 343

Page xiv

EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.

•

Updated the compass calibration procedure in chapter 5.

July 2013

•

Added a Compass Calibration Guide and updated the compass calibration procedure.

•

Changed input power from +9 to 24VDC to +12 to 20VDC.

•

Updated graphics to show longer housing.

•

Added table showing supported operating systems and browsers.

•

Added IP address 192.168.0.2 to Wireless Connection section.

•

Corrected sign convention for the Pitch and Roll table on page 29.

•

Updated ReadyV screen captures for data recorder and built-in tests.

•

Updated the ReadyVLite chapter.

•

Updated specifications and outline installation drawings.

•

Updated Troubleshooting section.

December 2012

•

Changed time the network is available after power up from three minutes to two.

•

Updated ReadyV system panel screen capture.

•

Added ReadyVLite chapter.

•

Added battery Velcro

strap and updated exploded system views.

•

Added creating, opening, and deleting scenario files.

•

Added Sentinel V Bandwidth specification.

•

Updated description for range.

•

Updated applying antifouling paint section.

•

Added minimum screen resolution to Computer Considerations section.

March 2012

•

Updated Maintenance panel screen capture and log file descriptions.

•

Added Recommended Minimum Blank Distance table.

February 2012

•

Updated Wireless Connection Common Issues section.

•

Updated compass calibration procedure.

•

Updated Starting and Stopping Deployments section.

•

Updated figure 10 raw roll signs/headings.

•

Updated System Setup panel (Orientation removed).

•

Changed name of VWeb to ReadyV.

•

Added Appendix B - GPL Compliance Notice.

December 2011

•

Initial release of the manual.

Summary of Contents for SENTINEL V REAL-TIME
























































































































































































































































































































































Search results

Summary of Contents for SENTINEL V REAL-TIME

Reviews:

Related manuals for SENTINEL V REAL-TIME

Brands by name

Popular brands

Teledyne RD Instruments SENTINEL V REAL-TIME, Operation Manual

Search results

Summary of Contents for SENTINEL V REAL-TIME

Reviews:

Related manuals for SENTINEL V REAL-TIME

Brands by name

Popular brands