Telect ADF User Manual Download Page 58

Page: 58 / 67

1.509.926.6000 :: telect.com

User Manual

Advanced Distribution Frame (ADF) Systems

2. Connect the patch cord to the adapter(s). Remember,

when cross-connecting, connect the patch cord at

both ends before routing cable.

Telect, Inc. • USA +1.509.926.6000 • 52.33.3836.37.52

Page 6-52

2. Connect the patch cord to the adapter(s). Remem-

ber, when cross-connecting, connect the patch cord

at both ends before routing cable.

Figure 49 - Connecting Patch Cord

3. Fit the cable neatly around the spool, through the

raceway, then into the cascade.

Figure 50 - Cable Routing in Tray

4. Close spool(s), door(s), turnstile(s), and then tray(s).
5. Record termination information on labels.

6. Place the cable run in

troughs, channels, and

other cable management

system components be-

fore routing cable around

ADF spools.

Tray L

Interconnection Label

Españo

França

Français:

Español:

Tray Label

Interconnection / Cross-Connection

Label

Figure 51 - Cable Routing in Module

Figure 49 - Connecting Patch Cord

3. Fit the cable neatly around the spool, through the

raceway, then into the cascade.

4. Close spool(s), door(s), turnstile(s) and then tray(s).
5. Record termination information on labels.

Telect, Inc. • USA +1.509.926.6000 • 52.33.3836.37.52

Page 6-52

2. Connect the patch cord to the adapter(s). Remem-

ber, when cross-connecting, connect the patch cord

at both ends before routing cable.

Figure 49 - Connecting Patch Cord

3. Fit the cable neatly around the spool, through the

raceway, then into the cascade.

Figure 50 - Cable Routing in Tray

4. Close spool(s), door(s), turnstile(s), and then tray(s).
5. Record termination information on labels.

6. Place the cable run in

troughs, channels, and

other cable management

system components be-

fore routing cable around

ADF spools.

Tray L

Interconnection Label

Españo

França

Français:

Español:

Tray Label

Interconnection / Cross-Connection

Label

Figure 51 - Cable Routing in Module

Figure 50 - Cable Routing in Tray

6. Place the cable run in

troughs, channels and other
cable management system
components before routing
cable around ADF spools.

Telect, Inc. • USA +1.509.926.6000 • 52.33.3836.37.52

Page 6-52

2. Connect the patch cord to the adapter(s). Remem-

ber, when cross-connecting, connect the patch cord

at both ends before routing cable.

Figure 49 - Connecting Patch Cord

3. Fit the cable neatly around the spool, through the

raceway, then into the cascade.

Figure 50 - Cable Routing in Tray

4. Close spool(s), door(s), turnstile(s), and then tray(s).
5. Record termination information on labels.

6. Place the cable run in

troughs, channels, and

other cable management

system components be-

fore routing cable around

ADF spools.

Tray L

Interconnection Label

Españo

França

Français:

Español:

Tray Label

Interconnection / Cross-Connection

Label

Figure 51 - Cable Routing in Module

Summary of Contents for ADF

































































Search results

Summary of Contents for ADF

Reviews:

Brands by name

Popular brands

Telect ADF, User Manual

Search results

Summary of Contents for ADF

Reviews:

Brands by name

Popular brands