manualshive.com logo in svg

Telect ADF, User Manual

Share
Download
Telect ADF User Manual Download Page 2

User Manual

Advanced Distribution Frame (ADF) Systems

© Telect, Inc.,  All Rights Reserved, 12.7.16 v.4

1.509.926.6000  ::  telect.com

User Manual

Advanced Distribution Frame (ADF) Systems

© Telect, Inc.,  All Rights Reserved, 12.7.16 v.4

1.509.926.6000  ::  telect.com

Page ii

User Manual 119736-4

Copyright 2016, Telect Inc., All Rights Reserved

Telect and Connecting the Future are registered trademarks of Telect, Inc. 

22425 East Appleway Ave., # 11 

Liberty Lake, WA 99019

Telect assumes no liability from the application or use of these products. Neither does Telect convey any 

license under its patent rights nor the patent rights of others. This document and the products described herein 

are subject to change without notice. 

Connecting the Future for Over 30 Years 

 

Telect challenges the status quo and looks beyond what is possible in network connectivity and  
power management. 

Founded in 1982, Telect is driven by the principles of innovation and customer service. Headquartered in 
Liberty Lake, WA, the privately held company supports a global network of customers with a comprehensive 
product portfolio and a values-driven corporate culture. 

Our products and solutions are found across communications service-provider networks, data centers and 
utility networks around the globe.

At Telect, we pride ourselves on our ability to respond to customer challenges, building a reputation among 
communications service providers for delivering solutions uniquely tailored to their needs.

We simplify networks.™

•  Exceptional lead-times
•  Custom integrated solutions
•  Rapid collaborative development and prototyping
•  UL and NEBs expertise

Technical Support 

E-mail: [email protected] 

Phone: 509-926-6000

Summary of Contents for ADF




































































Reviews:

No comments

Brands by name

Popular brands

Load more brands