Telect ADF User Manual Download Page 32

Page: 32 / 67

1.509.926.6000 :: telect.com

User Manual

Advanced Distribution Frame (ADF) Systems

2.8 Cross-Connect - IFC to NEs - Working/Protect - Standalone

Telect, Inc. • USA +1.509.926.6000 • 52.33.3836.37.52

Page 2-26

2.8 Cross-Connect - IFC to NEs - Working/Protect - Standalone

WaveTrax™ Cable

Management System

Protect Routing

InterBay Storage Panel (ISP)

Protect

Working

Network Element Modules

Working Routing

IntraFacility Cables (IFC)

3.6 m Cross-connect

Patch Cords

IFC Modules

Main ADF

Network Element

Patch Cords

Protect

Working

Figure 24 - Cross-Connect - IFC to NEs - Working/Protect - Standalone

This option is only for a standalone Main ADF bay:
• IFC (IntraFacility Cable) modules should be installed on the side opposite the ISP (InterBay

Storage Panel).

• Working fibers are either on the top or the bottom half of the Main ADF bay. Protect fibers are

placed in the opposite half.

• Interpanel routing should use the upper or lower trough corresponding to the module location.
• 3.6-m cross-connect patch cords — shorter cable lengths are required in

working/protect applications).

Figure 24 - Cross-Connect - IFC to NEs - Working/Protect - Standalone

This option is only for a standalone Main ADF bay:

• IFC (IntraFacility Cable) modules should be installed on the side opposite the ISP (Interbay Storage Panel)
•

Working fibers are either on the top or the bottom half of the Main ADF bay. Protect fibers are placed in the

opposite half

• Interpanel routing should use the upper or lower trough corresponding to the module location
•

3.6m cross-connect patch cords – shorter cable lengths are required in working/protect applications

Summary of Contents for ADF

































































Search results

Summary of Contents for ADF

Reviews:

Brands by name

Popular brands

Telect ADF, User Manual

Search results

Summary of Contents for ADF

Reviews:

Brands by name

Popular brands