© Telect, Inc., All Rights Reserved, 12.7.16 v.4
1.509.926.6000 :: telect.com
42
User Manual
Advanced Distribution Frame (ADF) Systems
c. Move the latch bar up or down so module trays slide smoothly into latch bar.
d. With trays in the latched position, retighten the three outer adjustment screws, then swing the trays
back out and finally retighten the three inner screws.
NOTE:
For further details on installing an ADF module to the main frame, please refer to Telect Part Number
137828,
Advanced Distribution Frame Module Installation and Fiber Routing Guide.
You can find this document
by searching on the part number or name at Telect.com
Telect, Inc. • USA +1.509.926.6000 • 52.33.3836.37.52
www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 119736-4
Page 4-42
c. Move the latch bar up or down so module trays slide smoothly into latch bar.
d. With trays in the latched position, retighten the three outer adjustment screws, then swing
the trays back out, and then finally retighten the three inner screws.
NOTE:
For further details on installing an ADF Module to the main frame, please refer to Telect
Part Number 137828,
Advanced Distribution Frame Module Installation and Fiber Routing Guide
.
You can find this document by searching on the part number or name on Telect.com.
Figure 37 - Adjusting Latch Bars (ADF Module Not Shown)
Latch Bar
Loosen three inner and
three outer screws to
adjust latch bar
Inner
Adjustment
Screws (3)
Outer
Adjustment
Screws (3)
Right Corner Front View of Main ADF
Left Corner Front View of Main ADF
Figure 37 - Adjusting Latch Bars (ADF Module Not Shown)
