manualshive.com logo in svg

Telect ADF, User Manual

Share
Download
Telect ADF User Manual Download Page 27

© Telect, Inc.,  All Rights Reserved, 12.7.16 v.4

1.509.926.6000  ::  telect.com

21

User Manual

Advanced Distribution Frame (ADF) Systems

2.3 Cross-Connect - IFC to IFCs 

Telect, Inc. • USA +1.509.926.6000 • 52.33.3836.37.52

 

www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 119736-4

Page 2-21

2.3 Cross-Connect - IFC to IFCs

InterFacility Cable (IFC)

WaveTrax™ Cable

Management System

IFC Modules

Main ADF

InterBay Storage Panel (ISP)

4.5 m Cross-connect

Patch Cord

Figure 19 - Cross-Connect - IFC to IFCs

Fundamentals of this cross-connect are as follows:
• IFC (IntraFacility Cable) modules are mounted on both sides of the Main ADF bay.
• The IFC comes in from ladder racking (or from floor) and is broken out and presented to the 

back sides of IFC modules.

• 4.5 m patch cords cross-connect IFC fiber to IFC fiber, with cable stored on the 

 

Main ADF bay.

Figure 19 - Cross-Connect - IFC to IFCs

Fundamentals of this cross-connect are as follows: 

•  IFC (IntraFacility Cable) modules are mounted on both sides of the Main ADF bay

• 

The IFC comes in from ladder racking (or from floor) and is broken out and presented to the back sides of 

IFC modules

• 

4.5m patch cords cross-connect IFC fiber to IFC fiber, with cable stored on the Main ADF bay

Summary of Contents for ADF




































































Reviews:

No comments

Brands by name

Popular brands

Load more brands