© Telect, Inc., All Rights Reserved, 12.7.16 v.4
1.509.926.6000 :: telect.com
32
User Manual
Advanced Distribution Frame (ADF) Systems
3.3.4 Installing Lower Trough Junction
Use M6 screws to attach the Main ADFs to the ISPs.
Telect, Inc. • USA +1.509.926.6000 • 52.33.3836.37.52
www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 119736-4
Page 3-32
3.3.4 Installing Lower Trough Junction
Use M6 screws to attach the Main ADFs to the ISPs.
Figure 28 - Lower ADF Junction
.
Lower Trough Junction
Three M6 Screws Secure
Each Edge to an ADF
Figure 29 - Lower Trough Junction Being Secured to the Main ADF XI
3.3.5 Installing Upper Trough Junction on ADF XI Bays
Connect the adjacent 8-in. upper ADF troughs using the plastic junction provided.
The upper ADF troughs are sandwiched between the upper and lower halves of this two-part,
8-in. junction. The prongs on the bottom of the upper half snap and lock into corresponding holes
in the lower half.
NOTE:
If you need to remove the junction, press in on the two pairs of prongs on the underside of
the junction to separate the two halves.
Figure 28 - Lower ADF Junction
Telect, Inc. • USA +1.509.926.6000 • 52.33.3836.37.52
www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 119736-4
Page 3-32
3.3.4 Installing Lower Trough Junction
Use M6 screws to attach the Main ADFs to the ISPs.
Figure 28 - Lower ADF Junction
.
Lower Trough Junction
Three M6 Screws Secure
Each Edge to an ADF
Figure 29 - Lower Trough Junction Being Secured to the Main ADF XI
3.3.5 Installing Upper Trough Junction on ADF XI Bays
Connect the adjacent 8-in. upper ADF troughs using the plastic junction provided.
The upper ADF troughs are sandwiched between the upper and lower halves of this two-part,
8-in. junction. The prongs on the bottom of the upper half snap and lock into corresponding holes
in the lower half.
NOTE:
If you need to remove the junction, press in on the two pairs of prongs on the underside of
the junction to separate the two halves.
Figure 29 - Lower Trough Junction Being Secured to the Main ADF XI
3.3.5 Installing Upper Trough Junction on ADF XI Bays
Connect the adjacent 8 in. upper ADF troughs using the plastic junction provided.
The upper ADF troughs are sandwiched between the upper and lower halves of this two-part, 8 in. junction.
The prongs on the bottom of the upper half snap and lock into corresponding holes in the lower half.
NOTE:
If you need to remove the junction, press in on the two pairs of prongs on the underside of the junction
to separate the two halves.
