Tele Radio T60, Installation Instruction

Page: 24 / 56

24
-
INCORRECT FUNCTION POSSIBLE CAUSES ACTION
The receiver does not work when
you are
transmitting. The receiver is
incorrectly connected. Check the connection on
the receiver.
Incorrect
operating voltage to the
receiver. Check the supply
voltage.
The green receiver LED lights up
when you are transmitting, but the
relays are not activated. The transmitter and the
receiver are not correctly
co-programmed. Follow the
instructions to
co-program the units.
The green receiver LED does
not light up when you are
transmitting. The battery is dead. Replace the battery.
The transmitter is defective. Contact your
representative.
The green receiver LED lights up
when you are not transmitting. Somebody is transmitting
in the vicinity on a similar
frequency. Contact your
representative.
The transmitter’s LED does
not light up when you are
transmitting. The battery is dead. Replace or charge the
battery.
The transmitter may be
defect. Contact your
representative.
The range is too short. Poor battery. Switch the battery.
The antenna cables are
damaged or
incorrectly installed. Check the antenna
connection.
TROUBLE SHOOTING