Tele Radio T60, Installation Instruction, Page: 22 / 56

22
(A)
(B)
4 1 2 3 5 6 7 8 9 1 0
+
0
ON
1
REPLACE A 460 TRANSMITTER
T60TX-15DML replaces 401RVL9/ 403RVL9 transmitter with
knob 1-10
1. Put the transmitter switch (A) in position 1 (OFF).
2. Put the code switch 9 (B) in position 0 (zero) .
3. Put code switch 10 in minus or plus position, depending on whether
you are using A or B coding on the old transmitter (Robust transmitter).
4. Set codes (identical to the receiver codes) on the transmitter code
switches 1-4 (code switches 5-8 are not used).
5.Check that the relay is activated when one of the transmitter buttons
is pressed. The digits on the transmitter display correspond to the knob.
Press one figure followed by a transmitter button. Make sure that the
corresponding relay is activated.
See code table 1-10, Appendix A.