Tele Radio T60, Installation Instruction

Page: 13 / 56

13
PROGRAM T60RX-04#SL/ T60RX-08#SL
1. Press the Function button to scroll between the programming
options:
• Code learning (LED 6 lights red)
• Latching relay (LED 7 lights yellow)
• Interlocked relays (LED 8 lights green)
2. a. Press the Select button when LED 6 lights red if you want to enter
the Code learning mode (see next section).
b. Press the Select button when LED 7 lights yellow if you want to
assign a latching functionality to a relay (see the Latching relay
section).
c. Press the Select button when LED 8 lights green if you want to
assign interlocking to a relay-pair (see the Interlocking relay
section).
3.
When done, press the Select button.
CODE LEARNING
Adjustable ID code
1. Enter the ID code that you want to assign to your transmitter (or
more than one transmitter) on the 10-pole transmitter code switch.
The receiver will catch up the same ID code when co-programmed.
2.
Press the receiver Function button to select Code learning (LED 6
lights red).
3. Press the Select button (red LED 6 go out, the relay LEDs light red).
4. Press the receiver Function button to light up the LED above the
relay that you want to control.
• When you enter, all relays are selected by default and trans-
mitter button 1 controls relay 1, button 2 controls relay 2 etc.
• If you want to make other settings: Press the Function button to
step through the relays one by one. Select a relay by pressing the
Select button. When a relay has been selected, red LED 6 light
red. If it isn´t selected, red LED 6 isn´t lit.
5. When done, press the Select button.
6. Press the button that is to control the selected relay until LED 6
flashes red 3 times.